Product range
Cordless drills and impact drivers for import and wholesale
Brushless and brushed drills on 16.8 V and 21 V platforms, from bare tools through to two-battery kits in a plastic case. Chuck size, case type and plug are fixed per order.
- Samples from 1 unit
- OEM/ODM from 30 units
- CE as standard
- FOB Shenzhen / Ningbo / Yiwu
Cordless drills we supply
Every model below ships with the voltage, plug type and packaging your market needs. None of them are listed with a price, because the right price depends on your configuration, your quantity and your port.
-
Brushless Cordless Impact Drill, 21 V
A 21 V brushless impact drill quoted at 50 N·m with a 10 mm chuck, supplied as a bare tool or in one of nine kit combinations on five-cell or ten-cell batteries.
Specification & quote -
Brushless Cordless Impact Drill, 16.8 V
A 16.8 V brushless drill with a 13 mm keyless self-locking chuck and a 4815 motor, quoted at 60 N·m, as a bare tool or in four kit combinations with a large or small plastic case.
Specification & quote -
Brushed Cordless Impact Drill, 21 V, 118-Piece Set
A 21 V brushed impact drill quoted at 65 N·m with a 13 mm three-jaw chuck and 1,200 rpm no-load, sold only as a complete 118-piece two-battery set.
Specification & quote
Configuration
What you can change before we produce
None of this is fixed until you approve it in writing. These are the options buyers change most often on Cordless drills orders:
- Brushless or brushed motor
- Chuck 10 mm or 13 mm
- Battery count: bare tool, one battery, two batteries
- Case: large plastic case, small plastic case or colour box
- Plug: Type C, Type D, Type G or bare wire
How our OEM/ODM programme works · How we inspect before shipping
Where these tools are used
- Hardware and electrical wholesale
- Home improvement and renovation retail
- Furniture and appliance installation
- Light construction and maintenance
- Tool-set gifting and DIY retail
Market notes. The drill is the product most importers open a power-tool range with, so it is also the one where the price of the two-battery kit decides the order. In the Middle East the 21 V platform is the safer base for a range because the same battery is shared with wrenches, grinders and rotary hammers; a 16.8 V drill is a lower-cost entry model that will not share a battery with anything else in the catalogue.
Cordless drills — buyer questions
Should I stock the 16.8 V or the 21 V drill?
If the drill is the whole order, the 16.8 V brushless model lands at a lower cost and is the easier sell to DIY retail. If you intend to add a wrench, an angle grinder or a rotary hammer later, buy the 21 V model instead: it shares the battery, and a customer buying a second tool then only needs the bare tool, not another charger.
What is actually different between the brushed and brushless 21 V drills?
The motor, the torque figure and the price. The brushed model is quoted at 65 N·m and ships as a two-battery set; the brushless model is quoted at 50 N·m and is available as a bare tool or in five kit combinations. Neither figure is a laboratory rating, so ask us for the current spec sheet before you print a torque claim on your packaging.
Can I print my own brand on the drill and the case?
Yes, from 30 units. We can change the silkscreen on the tool, the label on the case, the colour of the housing and the retail box. Send us the artwork and we will confirm what the tooling allows before you commit.
Buyers of Cordless drills usually order these too
-
Cordless Impact Wrenches
21 V impact wrenches rated at 350 N·m in bare-tool and kit configurations, including a dual-function housing and a colour range. Battery count and socket set are fixed per order.
-
Laser Levels
Battery-powered self-levelling laser levels for wall and floor work — a 12/16-line tiling model and a 16-line digital set. Both ship as a complete kit with two batteries, a charger and a case.
-
Cordless Rotary Hammers
21 V rotary hammers in light, round-shank and combi-set configurations, all three in three-mode operation — hammer drilling, flat drilling and chiselling. Configurations run from the bare tool to a two-battery set in a case.
-
Cordless Angle Grinders
Brushless 21 V grinders in 100 mm and 125 mm, plus two 12 V mini models — one of them with a 75 mm saw blade. Disc size, battery count and the accessory set are fixed per order.
-
Cordless Pruning Shears
Battery pruning shears in 25 mm and 40 mm cutting capacity, supplied with a sharpening stone in a plastic case. Battery count and blade length are fixed per order.
-
Cordless Chain Saws
A 21 V chain saw with a 20 cm bar and a high-carbon steel chain, supplied as a bare tool or as a one- or two-battery kit in a paper box or a plastic case.
-
Cordless Circular Saws
Two 18–21 V circular saws — a 6-inch single-hand model and a 125 mm 1800 W model — each available as a bare tool or as a one- or two-battery kit.
-
Cordless Blowers
Four battery blowers — a blow-and-vacuum combo, a 300 m³/h turbine model, a three-nozzle set and an 18–22 V general-purpose model. Battery count, nozzle set and mode are fixed per order.
-
Cordless Tile Vibrators
A battery tile vibrator for laying wall and floor tiles, supplied as a bare tool or with one or two batteries. It seats tiles by vibration instead of by tapping.
-
Cordless Grass Trimmers
A 21 V rotary-blade cutter with a telescopic shaft and a protective guard, for verge, orchard and garden clearing. Bare tool or one- and two-battery kits.
Send us your Cordless drills list, get one written quotation
Tell us the models and quantities you are comparing, plus your destination port. One reply covers all of them, with MOQ, lead time and packing — not just a price.